NSN 3020-00-646-7035 · NIIN 006467035 · FSC 3020
NO DASHES 3020006467035
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.315 |
| FEAT | SPECIAL FEATURES | FIRST END SPLINE MAJOR DIA 1.965 IN. NOM |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 12 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AISI TO SAE 8620 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.938 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.250 |
| CWNH | TOOTH FORM | SPECIAL |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.812 |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.938 |
| CWPZ | HELIX ANGLE | DEGREES 30.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.438 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.125 |
| ANTP | BORE STYLE | |
| CWNM | TOOTH DIRECTION | LEFT |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.6250 |
| AJLA | TEETH QUANTITY | 29 |
| STYL | STYLE DESIGNATOR | |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 1.8438 |