NSN 3020-00-670-6472 · NIIN 006706472 · FSC 3020
NO DASHES 3020006706472
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 AND THREADED 2 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 48.0 AND ROCKWELL C MAXIMUM 52.0 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQFM | HARDNESS RATING | HUB ROCKWELL C NOMINAL 25.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-5626,COND F |
| SFTT | SURFACE TREATMENT | OVERALL OXIDE |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5424 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.089 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.2503 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.420 |
| CWPZ | HELIX ANGLE | DEGREES 11.6332 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.462 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.277 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.250 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.6040 |
| CWNH | TOOTH FORM | STANDARD |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| AJLA | TEETH QUANTITY | 17 |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |