NSN 3020-00-673-3421 · NIIN 006733421 · FSC 3020
NO DASHES 3020006733421
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.125 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C NOMINAL 59.0 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE SAE9310 |
| STYL | STYLE DESIGNATOR | |
| ABSA | SPLINE QUANTITY | 6 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.8570 |
| AAQL | BODY STYLE | |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.374 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.8000 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 41.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.999 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.885 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.462 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.803 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 0.462 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.933 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.130 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.181 |
| MATT | MATERIAL | OVERALL STEEL |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.838 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.540 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.374 |
| CWXG | SECOND STEP NOMINAL LENGTH | FIRST END INCHES 0.152 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 1.312 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.312 |
| AJLA | TEETH QUANTITY | 40 |
| ANTP | BORE STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.312 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.181 |