NSN 3020-00-675-0234 · NIIN 006750234 · FSC 3020
NO DASHES 3020006750234
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.062 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.6041 |
| AJLA | TEETH QUANTITY | 58 |
| ANTP | BORE STYLE | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.199 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.343 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.156 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.156 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 26.0 AND ROCKWELL C MAXIMUM 32.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.625 |
| CWNH | TOOTH FORM | STANDARD |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.251 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS416SE |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MATT | MATERIAL | OVERALL STEEL COMP 416SE |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.281 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 23300 | 50027 |