NSN 3020-00-678-6085 · NIIN 006786085 · FSC 3020
NO DASHES 3020006786085
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| AAQL | BODY STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.251 |
| AJLA | TEETH QUANTITY | 50 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4790 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.311 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.227 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 15.3249 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.502 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.125 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.745 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.684 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.190 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.623 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 197.0 AND BRINELL STANDARD MAXIMUM 235.0 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 255065B | 1ML14 |
| 255065B | 28265 |
| 559D1-0618 | 75377 |
| P1157 | 07860 |
| P1157 | 0BXF1 |