NSN 3020-00-684-1252 · NIIN 006841252 · FSC 3020
NO DASHES 3020006841252
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 78 |
| AAQL | BODY STYLE | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.666 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| ANTP | BORE STYLE | |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.6500 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.438 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.071 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.265 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.156 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |