NSN 3020-00-684-2231 · NIIN 006842231 · FSC 3020
NO DASHES 3020006842231
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| AAQL | BODY STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.2490 AND INCHES MAXIMUM 1.2500 |
| AJLA | TEETH QUANTITY | 60 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.292 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303SE |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| FEAT | SPECIAL FEATURES | UNTHREADED HOLE 90 DEG FROM THREADED HOLE,1 EA SET SCREW |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| STYL | STYLE DESIGNATOR |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP24-60P1 | 23266 |
| GP24-60 | 23266 |
| A250-60-P1 | 22488 |
| P48S26-60 | 29440 |
| 736786-02 | 35351 |
| G3-60 | 00141 |
| H21-60 | 00328 |
| G3-60-Q10 | 00141 |
| 246-801-521 | 06003 |
| 75-805390-2 | 07397 |
| GX16000-60 | 14418 |
Supersedes
This item replaces cancelled NIINs 002296943 · 009003202. An older drawing citing one of those numbers resolves here.