NSN 3020-00-686-1867 · NIIN 006861867 · FSC 3020
NO DASHES 3020006861867
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.352 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 27.0 AND ROCKWELL C MAXIMUM 62.0 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.3430 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 4620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493,CO- 4620 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.3120 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.075 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| AJLA | TEETH QUANTITY | 42 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| SFTT | SURFACE TREATMENT | OVERALL PHOSPHATE |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| AAQL | BODY STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| ABSA | SPLINE QUANTITY | 11 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 880129 | 98889 |