NSN 3020-00-690-0808 · NIIN 006900808 · FSC 3020
NO DASHES 3020006900808
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.187 |
| ABSA | SPLINE QUANTITY | 13 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5420 |
| AJLA | TEETH QUANTITY | 26 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.582 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.120 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.1083 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| K101230 | 32904 |
| 11114-1028P1 | 3B150 |
| 11114-1028P1 | 49956 |
| 11114-1028P1 | 54X10 |
| 11114-1028P1 | 99687 |