NSN 3020-00-700-0728 · NIIN 007000728 · FSC 3020
NO DASHES 3020007000728
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E4340H |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.750 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.283 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.497 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 1.062 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.750 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.0000 |
| AJLA | TEETH QUANTITY | 35 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 65.0 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.377 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.193 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE E4340H |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.997 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.437 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005349296. An older drawing citing one of those numbers resolves here.