NSN 3020-00-710-0731 · NIIN 007100731 · FSC 3020
NO DASHES 3020007100731
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,TYE 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.312 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.187 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.853 |
| CWNH | TOOTH FORM | STANDARD |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.8323 AND INCHES MAXIMUM 0.8333 |
| AJLA | TEETH QUANTITY | 80 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP55-80P1 | 23266 |
| ES1663-61T | 20418 |
| GP55-80 | 23266 |
| P96A10-80 | 29440 |
| 363-451-9003 | 70210 |
| 610756 | 00141 |
| B25A80 | 00328 |
| G380-80 | 00141 |
| G30-80 | 00141 |
| G44A80 | 12444 |
| 96-80H255A | 11915 |
Supersedes
This item replaces cancelled NIIN 004002232. An older drawing citing one of those numbers resolves here.