NSN 3020-00-724-4860 · NIIN 007244860 · FSC 3020
NO DASHES 3020007244860
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 34.0 AND ROCKWELL C MAXIMUM 38.0 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.750 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.190 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.458 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.062 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END PLAIN 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.3636 |
| CWNH | TOOTH FORM | STANDARD |
| CWNM | TOOTH DIRECTION | LEFT |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE A-S6260 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2269 |
| AJLA | TEETH QUANTITY | 17 |
| ANTP | BORE STYLE | |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.109 |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWPZ | HELIX ANGLE | DEGREES 30.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.312 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 354D074H01 | 48306 |
| 710-1001-0 | 82402 |
| 354D074H01 | 97942 |
| 354D074 | 97942 |