NSN 3020-00-725-9460 · NIIN 007259460 · FSC 3020
NO DASHES 3020007259460
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STUB |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.3790 |
| AJLA | TEETH QUANTITY | 43 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 32.0 AND ROCKWELL C MAXIMUM 36.0 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | PRESS FIT |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.3173 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.5004 |
| FEAT | SPECIAL FEATURES | ITEM COUNTEBORED,0.650 IN. DIA,0.070 IN. DEEP |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5630 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.0960 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.2979 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.7500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.2200 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.2500 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| A31123 | 12511 |