NSN 3020-00-734-6541 · NIIN 007346541 · FSC 3020
NO DASHES 3020007346541
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.0000 |
| CWRS | BORE NOMINAL DIAMETER | SECOND END INCHES 0.944 |
| AJLA | TEETH QUANTITY | 21 |
| ABSA | SPLINE QUANTITY | 21 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | SECOND END INCHES NOMINAL 1.2500 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.1945 |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.2200 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.310 |
| CWQD | PITCH ANGLE | DEGREES 36.5269 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.130 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.310 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.500 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.280 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 1.000 |