NSN 3020-00-734-6777 · NIIN 007346777 · FSC 3020
NO DASHES 3020007346777
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPZ | HELIX ANGLE | DEGREES 26.1769 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.088 |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| AAQL | BODY STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.344 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.625 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.625 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 3.625 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.7571 |
| CWNH | TOOTH FORM | SPECIAL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.375 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.531 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.329 |
| AJLA | TEETH QUANTITY | 31 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.140 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.