NSN 3020-00-737-1206 · NIIN 007371206 · FSC 3020
NO DASHES 3020007371206
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.063 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.562 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.388 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620H |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 3.000 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.562 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.999 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.062 |
| AJLA | TEETH QUANTITY | 37 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.8490 |
| ABSA | SPLINE QUANTITY | 12 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.2860 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8620H |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 2.435 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.150 |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| CWNH | TOOTH FORM | STANDARD |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.250 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.250 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.