NSN 3020-00-737-9050 · NIIN 007379050 · FSC 3020
NO DASHES 3020007379050
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Application: ENGINE, AIRCRAFT J-52
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.950 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.040 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQD | PITCH ANGLE | DEGREES 23.8650 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.391 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.164 |
| ABSA | SPLINE QUANTITY | 27 |
| AGAV | END ITEM IDENTIFICATION | ENGINE, AIRCRAFT J-52 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0769 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL A MINIMUM 81.0 AND ROCKWELL A MAXIMUM 85.0 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL |
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.181 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.878 |
| CWTR | HUB STYLE DESIGNATOR | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.8438 |
| CWNM | TOOTH DIRECTION | RIGHT |
| AJLA | TEETH QUANTITY | 23 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | ZEROL TEETH |