NSN 3020-00-738-3166 · NIIN 007383166 · FSC 3020
NO DASHES 3020007383166
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANTP | BORE STYLE | |
| MATT | MATERIAL | OVERALL COPPER ALLOY 260 |
| ABSA | SPLINE QUANTITY | 11 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.203 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.256 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.031 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 0.500 |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.093 |
| AAQL | BODY STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.2550 |
| AJLA | TEETH QUANTITY | 31 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.694 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.296 |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-B-613,ALLOY 260,H |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.6420 AND INCHES MAXIMUM 0.6460 |
| CWTR | HUB STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 500053 | 08638 |