NSN 3020-00-741-2875 · NIIN 007412875 · FSC 3020
NO DASHES 3020007412875
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.188 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.339 |
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | SPLINE MINOR DIA. 1.782 IN. NOM |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 55.0 AND ROCKWELL C MAXIMUM 60.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.534 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 2.172 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 2.812 |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 25.0 AND ROCKWELL C MAXIMUM 35.0 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 2.435 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.656 |
| CWTB | COUNTERBORE NOMINAL DEPTH | SECOND END INCHES 0.203 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | SECOND END INCHES 2.593 |
| AJLA | TEETH QUANTITY | 15 |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| ABSA | SPLINE QUANTITY | 10 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8620 |
| ANTP | BORE STYLE | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.515 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 003449908. An older drawing citing one of those numbers resolves here.