NSN 3020-00-760-3124 · NIIN 007603124 · FSC 3020
NO DASHES 3020007603124
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.148 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.335 |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.275 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 0.500 |
| FEAT | SPECIAL FEATURES | MTG HOLES SPACED 120 DEG APART |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4120 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| AJLA | TEETH QUANTITY | 90 |
| ANTP | BORE STYLE | |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.060 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.343 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.025 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | AXIALLY THROUGH BODY FIRST END INCHES 0.105 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.1240 AND INCHES MAXIMUM 1.1250 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH BODY FIRST END PLAIN 3 |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 913-361 | 10639 |