NSN 3020-00-764-5453 · NIIN 007645453 · FSC 3020
NO DASHES 3020007645453
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.106 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.188 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.188 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 0.344 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.387 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.6250 |
| AJLA | TEETH QUANTITY | 30 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.666 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 8 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.915 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.014 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.254 |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL PLASTIC POLYAMIDE NYLON |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL--17091 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007393440. An older drawing citing one of those numbers resolves here.