NSN 3020-00-768-2086 · NIIN 007682086 · FSC 3020
NO DASHES 3020007682086
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP E9310 |
| AAQL | BODY STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | BETWEEN BODY AND FLANGE INCHES 2.000 |
| CWPS | FLANGE NOMINAL THICKNESS | INCHES 1.260 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.745 |
| CWSH | NOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE | INCHES 0.940 |
| CWNK | FLANGE NOMINAL DIAMETER | INCHES 4.860 |
| CWPP | PRESSURE ANGLE | DEGREES 22.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 6260 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 79.0 AND ROCKWELL C MAXIMUM 85.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.378 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 40.0 |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 4.5000 |
| ANTP | BORE STYLE | |
| ABSA | SPLINE QUANTITY | 72 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.2500 |
| AJLA | TEETH QUANTITY | 36 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 358171 | 77445 |