NSN 3020-00-773-7529 · NIIN 007737529 · FSC 3020
NO DASHES 3020007737529
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66 AND ASSN STD SINGLE MATERIAL RESPONSE AISI TO SAE 1045 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.938 |
| FEAT | SPECIAL FEATURES | 7 CLUTCH TEETH EQUALLY SPACED ON HUB END |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.438 |
| CWNH | TOOTH FORM | STANDARD |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.5620 |
| MATT | MATERIAL | OVERALL STEEL COMP 1045 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.870 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 30.0 AND ROCKWELL C MAXIMUM 34.0 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.000 |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.188 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 1.375 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.622 |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| AJLA | TEETH QUANTITY | 73 |
| AAQL | BODY STYLE |