NSN 3020-00-774-1419 · NIIN 007741419 · FSC 3020
NO DASHES 3020007741419
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPZ | HELIX ANGLE | DEGREES 29.0037 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.187 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CQFM | HARDNESS RATING | BODY ROCKWELL H MINIMUM 70.0 AND ROCKWELL H MAXIMUM 85.0 |
| CWRB | BODY RECESS NOMINAL DEPTH | SECOND END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.189 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.718 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.313 |
| MATT | MATERIAL | OVERALL STEEL |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL H MINIMUM 70.0 AND ROCKWELL H MAXIMUM 85.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.600 |
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 6.4031 |
| AJLA | TEETH QUANTITY | 56 |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-633,CO- B1112-CANCELED |
| STYL | STYLE DESIGNATOR |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIINs 003979659 · 009380794. An older drawing citing one of those numbers resolves here.