NSN 3020-00-774-4886 · NIIN 007744886 · FSC 3020
NO DASHES 3020007744886
In Stock
GEAR,BEVEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.667 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.370 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 1.968 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.690 |
| CBBL | FEATURES PROVIDED | STRAIGHT TEETH |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.6630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE 66,AISI TO SAE 8617H |
| STYL | STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQD | PITCH ANGLE | DEGREES 68.0000 |
| CWRB | BODY RECESS NOMINAL DEPTH | FIRST END INCHES 0.1670 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.500 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.886 |
| MATT | MATERIAL | OVERALL STEEL COMP 8617H |
| AJLA | TEETH QUANTITY | 104 |
| CWXL | SECOND STEP NOMINAL DIAMETER | SECOND END INCHES 2.250 |
| FEAT | SPECIAL FEATURES | 38 TOOTH EXTERNAL INVOLUTE SPLINE ON HUB END,1.886 IN. MIN.,1.889 IN. MAX MAJOR DIA.,1.760 IN. MIN,1.770 IN. MAX MINOR DIA,1.850 IN. PITCH DIA,0.500 IN. LG OF SPLINE; BORE DIA 1.380 IN. NOM; BORE LENGTH 1.500 IN. NOM |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.4444 |