NSN 3020-00-775-4221 · NIIN 007754221 · FSC 3020
NO DASHES 3020007754221
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.375 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.608 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.638 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.013 |
| CWNH | TOOTH FORM | STANDARD |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.895 |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 0.8000 |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| STYL | STYLE DESIGNATOR | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.8500 |
| AJLA | TEETH QUANTITY | 57 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7393 |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.141 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.000 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.000 |
| CQFM | HARDNESS RATING | BODY ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 41.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 61.0 AND ROCKWELL C MAXIMUM 64.0 |
| ABSA | SPLINE QUANTITY | 16 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 603291 | 62983 |