NSN 3020-00-776-7397 · NIIN 007767397 · FSC 3020
NO DASHES 3020007767397
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.824 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.060 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWNH | TOOTH FORM | STANDARD |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C NOMINAL 60.0 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | AXIALLY THROUGH HUB FIRST END PLAIN 6 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C NOMINAL 34.0 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.5000 |
| AJLA | TEETH QUANTITY | 60 |
| ANTP | BORE STYLE | |
| CWTB | COUNTERBORE NOMINAL DEPTH | FIRST END INCHES 0.160 |
| CWTR | HUB STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 8615 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-13048 |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 5.690 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 5.690 |
| CWZK | MOUNTING HOLE NOMINAL DIAMETER | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.334 |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | AXIALLY THROUGH HUB FIRST END INCHES 4.750 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | FIRST END INCHES 5.376 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 4.120 |