NSN 3020-00-791-5712 · NIIN 007915712 · FSC 3020
NO DASHES 3020007915712
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 67 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.126 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.029 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.230 |
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.040 |
| MATT | MATERIAL | OVERALL STEEL COMP 416 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS416 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.100 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.078 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.700 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.595 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0470 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9678 | 82152 |