NSN 3020-00-791-7914 · NIIN 007917914 · FSC 3020
NO DASHES 3020007917914
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.455 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 5.312 |
| STYL | STYLE DESIGNATOR | |
| AJLA | TEETH QUANTITY | 25 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.062 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.500 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.625 |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.367 |
| CWTB | COUNTERBORE NOMINAL DEPTH | BOTH ENDS INCHES 2.500 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 57.0 AND ROCKWELL C MAXIMUM 65.0 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.187 |
| ABSA | SPLINE QUANTITY | 10 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.0000 |
| CWTG | COUNTERBORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.125 |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 3.750 |
| MATT | MATERIAL | OVERALL STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED STD 66 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 3.150 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 1.312 |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.750 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 205-116 | 96606 |