NSN 3020-00-794-4382 · NIIN 007944382 · FSC 3020
NO DASHES 3020007944382
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS 303,COND A |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.2500 |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 75.0 AND ROCKWELL C MAXIMUM 83.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.281 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ES2160-22 | 20418 |
| 69115-1080 | 82340 |
| E22-80P2 | 00328 |
| 265-80SP2 | 01351 |
| G11-80P2 | 00141 |
| CS3020-0019 | 16236 |
Supersedes
This item replaces cancelled NIINs 000074638 · 007703078. An older drawing citing one of those numbers resolves here.