NSN 3020-00-800-0196 · NIIN 008000196 · FSC 3020
NO DASHES 3020008000196
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWYL | NOMINAL DISTANCE FROM END TO FIRST GROOVE | FIRST END INCHES 0.062 |
| CWYD | FIRST GROOVE NOMINAL DIAMETER | FIRST END INCHES 0.469 |
| CWXY | FIRST GROOVE NOMINAL WIDTH | FIRST END INCHES 0.156 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 13 OR QUALITY NUMBER 14 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.219 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.375 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| AJLA | TEETH QUANTITY | 150 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 3.1630 |
| CWNH | TOOTH FORM | STANDARD |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 3.1250 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-351 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| AAQL | BODY STYLE | |
| STYL | STYLE DESIGNATOR |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8000196 | 18876 |