NSN 3020-00-814-3583 · NIIN 008143583 · FSC 3020
NO DASHES 3020008143583
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8050 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.187 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.833 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.031 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.656 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 6061 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.219 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| AJLA | TEETH QUANTITY | 130 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 8,T6 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625,TYE 2,CLASS 1 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 9170523 | 18876 |