NSN 3020-00-823-6065 · NIIN 008236065 · FSC 3020
NO DASHES 3020008236065
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 24 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 2.3125 |
| MATT | MATERIAL | OVERALL STEEL COMP 8720 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.030 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.8000 |
| BDZQ | BACKLASH DESIGNATION | GRADE A |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 60.0 AND ROCKWELL C MAXIMUM 60.0 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.550 |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.200 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.431 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 5.198 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624,CO- 8720-CANCELED |
| STYL | STYLE DESIGNATOR | |
| CWTR | HUB STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| ABSA | SPLINE QUANTITY | 37 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| V09-010-053 | 25169 |
| XV09-004-21 | 25169 |
| B8004-09-004-21 | 81996 |
| C8004-09-004FN21 | 81996 |
| B8005-09-010FN53 | 81996 |
Supersedes
This item replaces cancelled NIIN 007547428. An older drawing citing one of those numbers resolves here.