NSN 3020-00-825-0581 · NIIN 008250581 · FSC 3020
NO DASHES 3020008250581
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| AAQL | BODY STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| MATT | MATERIAL | OVERALL STEEL COMP 302 AND STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC 1ST MATERIAL RESPONSE -IL-S-7720,CO- 302 AND MIL SPEC 2ND MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 2.3431 AND INCHES MAXIMUM 2.3438 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| AJLA | TEETH QUANTITY | 150 |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.500 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.374 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP34-150P2 | 23266 |
| P64S26-150Q12 | 29440 |
| G13-150P2 | 00141 |
| H22-150P2 | 00328 |
| D48S150P2 | 12444 |
| CS3020-0056 | 16236 |