NSN 3020-00-828-4505 · NIIN 008284505 · FSC 3020
NO DASHES 3020008284505
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTR | HUB STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.604 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.375 |
| CWNH | TOOTH FORM | STANDARD |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.5625 |
| AJLA | TEETH QUANTITY | 75 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| AAQL | BODY STYLE | |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 32 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 154-75 | 01351 |
Supersedes
This item replaces cancelled NIIN 008092480. An older drawing citing one of those numbers resolves here.