NSN 3020-00-833-7510 · NIIN 008337510 · FSC 3020
NO DASHES 3020008337510
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWNH | TOOTH FORM | STANDARD |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| AAQL | BODY STYLE | |
| ANTP | BORE STYLE | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.542 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.343 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.5000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| MATT | MATERIAL | OVERALL STEEL COMP 303SE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303SE |
| STYL | STYLE DESIGNATOR | |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL B MINIMUM 75.0 AND ROCKWELL B MAXIMUM 83.0 |
| AJLA | TEETH QUANTITY | 24 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 40 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2330J6586-81 | 87557 |
| 2330J6586-81 | 94117 |
| G1-24 | 00141 |