NSN 3020-00-836-5996 · NIIN 008365996 · FSC 3020
NO DASHES 3020008365996
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.090 |
| AAQL | BODY STYLE | |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.060 |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 120 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.160 |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| AJLA | TEETH QUANTITY | 120 |
| ANTP | BORE STYLE | |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.140 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.0000 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.0400 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-268 |
| STYL | STYLE DESIGNATOR | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.090 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 2 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.017 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.050 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.020 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |