NSN 3020-00-839-1497 · NIIN 008391497 · FSC 3020
NO DASHES 3020008391497
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.188 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.172 |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-A-225 TO 6,T4 |
| SFTT | SURFACE TREATMENT | OVERALL ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| STYL | STYLE DESIGNATOR | |
| FEAT | SPECIAL FEATURES | HUB IS SPLIT EQUALLY IN FOUR SECTIONS 0.025 IN. W,0.280 IN. LG |
| AJLA | TEETH QUANTITY | 144 |
| ANTP | BORE STYLE | |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.120 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.4982 AND INCHES MAXIMUM 1.5002 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.297 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.062 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.520 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 15460 | 89944 |