NSN 3020-00-850-8048 · NIIN 008508048 · FSC 3020
NO DASHES 3020008508048
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35,TYE 2 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| TMQY | FURNISHED ITEMS AND QUANTITY | SETSCREW 1 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.0406 AND INCHES MAXIMUM 1.0416 |
| AJLA | TEETH QUANTITY | 50 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.082 |
| CWNH | TOOTH FORM | STANDARD |
| CWTR | HUB STYLE DESIGNATOR | |
| STYL | STYLE DESIGNATOR | |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 342C092H02 | 30086 |
| 046D10001-7 | 54497 |
| 2653432-15 | 56232 |
| G3-50 | 00141 |
| H21-50 | 00328 |
| G3-50ESS90 | 00141 |
| 0461D0001-7 | 03538 |
| 2653432-15 | 06424 |
Supersedes
This item replaces cancelled NIINs 001626074 · 001956030. An older drawing citing one of those numbers resolves here.