NSN 3020-00-852-5187 · NIIN 008525187 · FSC 3020
NO DASHES 3020008525187
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 5.8848 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.278 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.188 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.741 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.098 |
| FEAT | SPECIAL FEATURES | LETTER O STAMPED BETWEEN TEETH ON FACE OF GEAR SIDE 76 DEG 17 MIN CW FROM CENTER LINE OF KEYWAY,TWO PULLER HOLES |
| MATT | MATERIAL | OVERALL ALUMINUM ALLOY |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | OVERALL BRINELL STANDARD MINIMUM 75.0 AND BRINELL STANDARD MAXIMUM 95.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 6.015 |
| AAQL | BODY STYLE | |
| AJLA | TEETH QUANTITY | 54 |
| CWPZ | HELIX ANGLE | DEGREES 23.9196 |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 2.563 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWNH | TOOTH FORM | STANDARD |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.078 |