NSN 3020-00-853-8614 · NIIN 008538614 · FSC 3020
NO DASHES 3020008538614
In Stock
GEAR,WORM
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.188 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| CWPZ | HELIX ANGLE | DEGREES 7.1166 |
| CWPH | THREAD FORM DIRECTION | RIGHT-HAND |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| MATT | MATERIAL | OVERALL STEEL COMP 303S |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.375 |
| CWPC | THREAD FORM QUANTITY | 2 |
| CWTX | HUB NOMINAL DIAMETER | BOTH ENDS INCHES 0.312 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.562 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.3330 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720 |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.112 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 007361877. An older drawing citing one of those numbers resolves here.