NSN 3020-00-857-0899 · NIIN 008570899 · FSC 3020
NO DASHES 3020008570899
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AJLA | TEETH QUANTITY | 64 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.6656 AND INCHES MAXIMUM 0.6666 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AISI 303 TO SAE 30303 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.687 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.031 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| STYL | STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.250 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 0.184 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 531199-1064 | 23149 |
| M25-64 | 00328 |
| H7-64 | 00141 |
Supersedes
This item replaces cancelled NIIN 002532007. An older drawing citing one of those numbers resolves here.