NSN 3020-00-859-1700 · NIIN 008591700 · FSC 3020
NO DASHES 3020008591700
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.071 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 58.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWNH | TOOTH FORM | STANDARD |
| ABSA | SPLINE QUANTITY | 11 |
| BDTX | SPLINE PITCH DIAMETER | FIRST END INCHES NOMINAL 0.3750 |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 39 |
| CWTR | HUB STYLE DESIGNATOR | |
| MATT | MATERIAL | OVERALL STEEL COMP 4620 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.210 |
| AAQL | BODY STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.854 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.126 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7493,CO- 4620 |
| ANTP | BORE STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 0.8130 |
| STYL | STYLE DESIGNATOR | |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.140 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 299-10 | 09445 |