NSN 3020-00-860-9184 · NIIN 008609184 · FSC 3020
NO DASHES 3020008609184
In Stock
GEAR SECTOR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWRM | FACE NOMINAL WIDTH | INCHES 0.438 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 0.719 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.093 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 0.360 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 1.125 |
| FEAT | SPECIAL FEATURES | HUB CLAMPING SURFACE LENGTH 0.710TO 0.720 IN,TWO 0.125-40 UNC-2B THD HOLES BETWEEN GEAR TEETH AT FACE END OF ARC |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-C-390 |
| ABSX | ATTACHMENT METHOD | CLAMP |
| CWPL | MATING THREAD LEAD QUANTITY | 1 |
| ALPN | FACE TYPE | CONCAVE |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.062 |
| CWNM | TOOTH DIRECTION | RIGHT |
| AJLA | TEETH QUANTITY | 18 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.625 |
| STYL | STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| BDJT | PITCH RADIUS | INCHES NOMINAL 1.6970 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWNP | THROAT NOMINAL RADIUS | INCHES 0.271 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 8262001 | 19200 |