NSN 3020-00-862-6740 · NIIN 008626740 · FSC 3020
NO DASHES 3020008626740
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FEAT | SPECIAL FEATURES | HUB IS ALSO STEPPED,0.250 IN.DIA,0.031 IN.LG |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWNH | TOOTH FORM | STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-7720,CO- 303S |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 36 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.187 |
| CWWC | CLAMPING SURFACE NOMINAL LENGTH | FIRST END INCHES 0.250 |
| AAQL | BODY STYLE | |
| ABSX | ATTACHMENT METHOD | CLAMP |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3750 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.125 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.395 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.281 |
| STYL | STYLE DESIGNATOR |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GC30-36P1 | 23266 |
| C96S7-36 | 29440 |
| 531199 | 96214 |
| 531199-1036 | 96214 |
| M25-36 | 00328 |
| H7-36 | 00141 |
| 37011125-036 | 08783 |
| 44S36 | 12444 |
Supersedes
This item replaces cancelled NIIN 005150391. An older drawing citing one of those numbers resolves here.