NSN 3020-00-866-5490 · NIIN 008665490 · FSC 3020
NO DASHES 3020008665490
In Stock
GEAR,WORM WHEEL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGJS | PITCH DIAMETER | INCHES NOMINAL 1.8750 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.921 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWNP | THROAT NOMINAL RADIUS | INCHES 0.234 |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | TRANSVERSELY THROUGH HUB FIRST END THREADED 1 |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AAQL | BODY STYLE | |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MIL SPEC SINGLE MATERIAL RESPONSE -IL-B-994 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.220 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.180 |
| AJLA | TEETH QUANTITY | 120 |
| ALPN | FACE TYPE | CONCAVE |
| ANTP | BORE STYLE | |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | TRANSVERSELY THROUGH HUB FIRST END UNIFIED NATIONAL COARSE (UNC) |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | TRANSVERSELY THROUGH HUB FIRST END INCHES 0.138 |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| MATT | MATERIAL | OVERALL COPPER ALLOY |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| Q1-12 | 00141 |
Supersedes
This item replaces cancelled NIIN 005855754. An older drawing citing one of those numbers resolves here.