NSN 3020-00-894-2389 · NIIN 008942389 · FSC 3020
NO DASHES 3020008942389
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| STYL | STYLE DESIGNATOR | |
| AAQL | BODY STYLE | |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.187 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| ANTP | BORE STYLE | |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.781 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| AJLA | TEETH QUANTITY | 48 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,CLASS303 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.375 |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.218 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP30-48P1 | 23266 |
| P64S19-48 | 29440 |
| 64S11-48A64 | 94580 |
| E22-48 | 00328 |
| E618190 | 08783 |
| 64S10-48A6-4 | 08783 |
Supersedes
This item replaces cancelled NIIN 008009911. An older drawing citing one of those numbers resolves here.