NSN 3020-00-897-6268 · NIIN 008976268 · FSC 3020
NO DASHES 3020008976268
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNH | TOOTH FORM | STANDARD |
| ABSA | SPLINE QUANTITY | 14 |
| AAQL | BODY STYLE | |
| CWWN | END NOMINAL DIAMETER | FIRST END INCHES 1.630 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.750 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.250 |
| AJLA | TEETH QUANTITY | 26 |
| ANTP | BORE STYLE | |
| BDTX | SPLINE PITCH DIAMETER | BOTH ENDS INCHES NOMINAL 1.1667 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE MATERIAL RESPONSE FED-STD-66 |
| STYL | STYLE DESIGNATOR | |
| CWXB | FIRST STEP NOMINAL DIAMETER | SECOND END INCHES 2.200 |
| CWPP | PRESSURE ANGLE | DEGREES 25.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 2.340 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 1.390 |
| CWXB | FIRST STEP NOMINAL DIAMETER | FIRST END INCHES 1.772 |
| CWWH | END NOMINAL LENGTH | SECOND END INCHES 0.812 |
| CWXL | SECOND STEP NOMINAL DIAMETER | FIRST END INCHES 2.200 |
| FEAT | SPECIAL FEATURES | COUNTERBORE 2ND END,1.600 IN. DEEP BY 1.340 IN. DIA |
| MATT | MATERIAL | OVERALL STEEL COMP 5140 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.3330 |
| CWWN | END NOMINAL DIAMETER | SECOND END INCHES 1.772 |
| CWWS | FIRST STEP NOMINAL LENGTH | FIRST END INCHES 0.740 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL A NOMINAL 81.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.678 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWWH | END NOMINAL LENGTH | FIRST END INCHES 0.660 |
| CWWS | FIRST STEP NOMINAL LENGTH | SECOND END INCHES 0.560 |