NSN 3020-00-900-6414 · NIIN 009006414 · FSC 3020
NO DASHES 3020009006414
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,TYE 303,COND A |
| FEAT | SPECIAL FEATURES | UNTHREADED HOLE 90 DEG FROM THREADED HOLE |
| CWTR | HUB STYLE DESIGNATOR | |
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 1.2490 AND INCHES MAXIMUM 1.2500 |
| AJLA | TEETH QUANTITY | 80 |
| ANTP | BORE STYLE | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 10 OR QUALITY NUMBER 11 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 1.280 |
| CWNH | TOOTH FORM | STANDARD |
| STYL | STYLE DESIGNATOR |