NSN 3020-00-902-9228 · NIIN 009029228 · FSC 3020
NO DASHES 3020009029228
In Stock
GEAR,SPUR
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 20.0000 |
| CWWK | PRECISION CLASSIFICATION | QUALITY NUMBER 12 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.250 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR | |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 0.250 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 0.500 |
| CWNH | TOOTH FORM | STANDARD |
| AJLA | TEETH QUANTITY | 40 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-764,COND A |
| BDZQ | BACKLASH DESIGNATION | GRADE C |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 0.655 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES MINIMUM 0.6244 AND INCHES MAXIMUM 0.6250 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.125 |
| ANTP | BORE STYLE |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GP34-40P2 | 23266 |
| P64S26-40Q12 | 29440 |
| G13-40P2 | 00141 |
| H22-40P2 | 00328 |
| G13-40-Q12 | 00141 |
| D48S40P2 | 12444 |
| CS3020-0040 | 16236 |
Supersedes
This item replaces cancelled NIINs 007703120 · 010401719. An older drawing citing one of those numbers resolves here.